The CALIBRATOR is a highly recommended machine, especially if the tiles are going to be polished. Well, the function of this machine is to put all the tiles with the same thickness, using diamond heads, so that when they go to the polisher, it works in a more stable and more efficient way.
Standard disc diameters: 402mm, 532mm and 732mm, depending on the format of the tiles to be calibrated.
All diamonds, regardless of the size of the disc, are bolted, making it easier to change after abrasion.
Mechanical elevation system, by the use of motor and screw attached in the head.
Maximum and minimum height stops in each head, with diamond abrasion alarm.
Automatic lubrication system inside the heads by the use of an oil pump.
Small roll conveyor at the entrance of the machine for the storage of some tiles.
Standard bandwidths: 600mm and 800mm.
Regulation of the rubber band speed and the machine conveyors by the use of variable speed drives.
Regulation of the band guides by the use of a rotary wheel, according to the tile format to be calibrated.
Fan installed at the exit of the tiles for partial drying of them.
Contact us and we will advise you on your project