Cross Turnover Machine
The CROSS TURNOVER MACHINE is installed usually after the Calibrating Machine to put the tiles, face up, just before its entrance to the Grinding-Polishing Machine. It is called fixed because it turns over all the tiles that pass through it.
PROCESS
-
Entrance of the tiles, which come from the Calibrator
-
Turn every 60º, in order to make a more efficient work
-
Final turn of 180º of all the tiles to put them face up
-
Exit of the tiles towards the Polishing Machine, through a roller conveyor
KEY FEATURES
CONFIGURATION
Option to install 1 or 2 independent turning motors, depending on the number of tile rows.
Depending on the total width of the tiles, the useful width of the conveyors will be 600mm or 800mm.
Roller conveyor at the entrance and exit of the machine for the transport of the tiles.
Regulation of the conveyor speed and the machine turn by means of variable speed drives.
CONTROL SYSTEM
Independent control panel to activate the conveyors and the turning motor, in both directions.
Approved and integrated safety systems for the protection of machine operators.
AVAILABLE MODELS
V-600-F
Overall dimensions
1.200 (L) x 1.715 (A) x 1.570 (H) mm
Total weight
400 kg.
Power
From 0,84 Kw
Roller conveyor width
600 mm
Tile rows
2 - 200 X 200 mm
2 - 250 X 250 mm
1 - 300 X 300 mm
1 - 333 X 333 mm
1 - 400 X 400 mm
1 - 400 X 600 mm
1 - 500 X 500 mm
Production
From 1 to 7 linear meters/minute
V-800-F
Overall dimensions
1.200 (L) x 1.715 (A) x 1.570 (H) mm
Total weight
500 kg.
Power
From 1,68 Kw
Roller conveyor width
800 mm
Tile rows
2 - 200 X 200 mm
2 - 250 X 250 mm
2 - 300 X 300 mm
2 - 333 X 333 mm
1 - 400 X 400 mm
1 - 400 X 600 mm
1 - 500 X 500 mm
1 - 600 X 600 mm
Production
From 1 to 7 linear meters/minute
Contact us and we will advise you on your project
